[Note] This post also contains the Bearfoot FX Dyna Red Distortion [Note]
Everyone loves the Dyna Red - A great sounding overdrive/distortion circuit from Born of BJFe. A great, dynamic response with a smooth top end ar features of this great unit. Here's a demo video;
Check out the schematic here;
This schematic was reversed from a dyna red which had been modified by Bjorn himself to produce more character in the lower mids, Soulsonic found that by replacing the 0.47uF cap on the feedback loop with a 0.1uF cap that the original sound was restored.
Integrating the bass control of Paul C's Timmy circuit could work wonders, go on, give it a try!
Here's a perf/pcb layout for you;
Here's a perf/pcb layout for you;
Many thanks to all involved over at freestompboxes.org :-)
And now the Bearfoot Dyna Red Distortion, here's the scheme;
And now the Bearfoot Dyna Red Distortion, here's the scheme;
For more great info on Bjorn's stuff get over to the BJFe forum (http://www.bjfe.org) and ask some questions, Bjorn always puts an interesting answer down for you :) Get involved with the HoneyBee Project too!
很不错我是
ReplyDeleteMonsieur Briggs, I think you meant .47n, not .47u and .1n not .1u for the feedback loop cap in the BJF schematic; ie 470p vs 100p.
ReplyDeleteLove your site and visit it frequently, a tremendous resource with great circuit insights from which I've learned a lot. Many thanks!
Αν η προτεραιότητά σου είναι η άμεση απόκριση και η υψηλή αισθητική, τότε αυτός ο προορισμός θα γίνει η αγαπημένη σου συνήθεια. Επισκέφθηκα το nine casino και η ποιότητα των γραφικών σε συνδυασμό με την ταχύτητα στην Ελλάδα είναι πραγματικά κορυφαία. Μια τολμηρή κίνηση την κατάλληλη στιγμή μου χάρισε ένα hit που εκτόξευσε το balance μου στα ύψη μέσα σε λίγα λεπτά. Είναι ο πιο έξυπνος τρόπος για να μετατρέψεις την κάθε στιγμή σε μια ευκαιρία για μια μεγάλη και σίγουρη επιτυχία.
ReplyDelete