Yep. It's here alright, I actually drew the schematic up on this one! -
Check it out. Note that the power supply in the scheme is not the original switching type as used in the nano. It'll make no difference to the sound, all the power supply needs to do it provide 230VDC to those plates! You could sub in the power supply from this amp here: http://jjs.at/electronic/class_a_subminiature.html
Demo video:
Demo video:
This was kindly provided by a freestompboxes.org member, many thinks :-)
View the thread here: http://freestompboxes.org/viewtopic.php?f=2&t=511&p=55083#p55083
Here are some good links regarding sub-mini tube amps - http://amps.zugster.net/projects/subminiature
View the thread here: http://freestompboxes.org/viewtopic.php?f=2&t=511&p=55083#p55083
Here are some good links regarding sub-mini tube amps - http://amps.zugster.net/projects/subminiature
Hi ! Congratulations for your Work !
ReplyDeleteAlso, I have a question about your Schematic, there is something strange on it: The two Diodes; Z1 and Z2 are connected from the Gnd to the Gnd serially, is it normal ?
Many THanks
Taoz
No: Connected this 2 zener diodes from CT trafo to GND in order to reduce the HV by the zener voltage. JFK-Juerg
DeleteThen is the ground symbol on the CT an error? I think that's what he was referring to.
DeleteNonsense,zeners must be serial from center tap to ground !!!! not parallel with the gnd...
ReplyDeleteSoms wil je gewoon een avond ontspannen met wat entertainment zonder dat je wordt overspoeld door opdringerige advertenties of complexe registratieprocedures. De registratie bij leprezone casino was binnen enkele minuten geregeld, waardoor ik direct toegang had tot een indrukwekkend aanbod aan exclusieve games. Ik heb de afgelopen week verschillende providers uitgeprobeerd en de variatie in thema's en mechanieken is echt een pluspunt. Mijn laatste sessie eindigde met een positief saldo, wat natuurlijk altijd de beste manier is om een avondje uitloggen.
ReplyDelete