[NOTE - This post also contains info on the Fuchs Plush Drive & Jetter Gain Stage Red]
Here is the sought after "Zendrive" overdrive pedal. If you're unsure of what these are check out the Hermida Audio Website; http://www.vendio.com/stores/HermidaAudio/item/effects-pedals/zendrive/lid=2384441
And here is a demo video (there are plenty of sound samples on the Hermida website though...);
A full project, presented by the freestompboxes forum member "stratotrasto



Now the Fuchs Plush Drive - Well, it's just a Zendrive clone. Here's the evidence:
And the Jetter Gain Stage Red:
Soulsonic traced one out, here's what he found:
And the Schematic of the Gain Stage Red:
And here's what he had to say about it:
Here's the Zendrive topic on freestompboxes for reference: http://www.freestompboxes.org/viewtopic.php?f=7&t=268
Here's the Fuchs Plush Drive forum topic on freestompboxes.org for reference: http://www.freestompboxes.org/viewtopic.php?f=7&t=2411




Hi! I want to built this pedal, is this schematic right.There's some details unmarked on layout.
ReplyDeleteThe layout and schem do not match. Please update component labels.
ReplyDeleteCan anyone tell me how to make a mosferatu? I'm gonna build this zendrive off of the schematic so hopefully everything will work out.
ReplyDeleteI have built this on breadboard from the schematics and it works great. Question: I have used Bat43 insted of 41 that I could not find, would that make a massive difference in the quality of the distortion/amount of gain? Great blog BTW
ReplyDeleteSomeone posted pics of the guts of a Zen and the diodes were (2) BAT 46 and (1) germanium
ReplyDeleteI built this pedal on pad-per-hole board and it works great. I used the schematic exactly except for the wiring of the pots. I used the layout picture for that. The schematic and layout are quite different from what I can tell. It sounds great though!
ReplyDeletei built a couple more of these on pcb's. They sound awesome!
ReplyDeleteI can confirm that there are 2 bat46's and 1 1n34a in the clipping section as well as the fet's. Just de-gooped mine today.
ReplyDeletesorry about this probably stupid question: how do you de-goop your circuit?
DeleteI just finished this project on pad per hole. It is true that the schem does not match the layout. I did use the layout anyway I just found the right componants from the schem and substituted them in. I also made it as a three knob pedal with the voice control as an internal trimpot.I had already drilled the inclosure for a fuzz project that I decided to hold off on. So I recycled it. Besides I don't think I will change the settings that much. I did not have any schottky diodes (bat46), so I used 1- 1n34a and 2- 1n270. For the mosfets I used 1- 2n7000 and 1-bs170. Everything else is the same. Really I am not sure how much the 1 mosfet and 2 diodes really changed but it still sounds great. I was thinking of selling it while I was making it but now I don't know.
ReplyDeletehi can i order 2-3 PCBs from someone here that know the job?
ReplyDelete(authorized paypal).
please send me an offer to :
eran4share@gmail.com
also, where can i find the right component value ?
thank you ,
ERAN
Diskuse o podobnosti pedálu **Jetter** s **Hermida Zendrive** je zajímavým příkladem toho, jak malé změny v elektronickém zapojení mohou ovlivnit výsledný charakter kytarového efektu. Na první pohled mohou být obě konstrukce téměř totožné, ale při podrobnějším zkoumání se objeví několik rozdílů.
ReplyDeleteZa zmínku stojí především přepínač **Hard/Soft**, který u Jetteru nahrazuje ovladač Voice. Nejde přitom o klasické průběžné nastavení, ale o volbu mezi dvěma pevnými hodnotami stejného obvodu. Změny se týkají také kondenzátoru ve zpětné vazbě, hodnoty potenciometru Tone a ochrany proti přepólování napájení.
Zajímavou částí je identifikace součástek. Opamp i MOSFETy byly zřejmě záměrně označeny tak, aby nebylo možné jejich typ jednoduše určit. Měřením však lze u MOSFETů určit, že jde o N-kanálové tranzistory typu enhancement, takže lze uvažovat o běžných součástkách, jako jsou 2N7000 nebo BS170. Podobné je to i s diodami, kde kombinace křemíkových a germanium prvků může přispívat ke specifickému chování overdrive obvodu.
Právě takové drobnosti jsou pro stavitele efektů velmi zajímavé. Nejde jen o to, zda jsou dvě zařízení „klony“, ale také o to, jak konkrétní hodnoty součástek a jednotlivé úpravy ovlivňují dynamiku, kompresi, tón a reakci na hru.
Kdo se vedle technických projektů rád věnuje i dalším online aktivitám, může navštívit https://chicken-roadgame.cz/.
Porovnávání podobných efektů tak může být užitečné nejen pro kytaristy, ale i pro elektronické nadšence. Právě rozdíly ukryté v několika součástkách často vysvětlují, proč dva na pohled téměř stejné pedály nemusí znít úplně stejně.
Сайхан мэдээ бэлтгэсэн News.mn багт баярлалаа. Манай залуусын тоглолтын тактик болон individual skill дэлхийн түвшинд хүржээ. Гадаадын чансаатай тэмцээнүүдэд оролцох боломжийг бүрдүүлж, бэлтгэл сургуулилтад 1xbet mongolz сайн тусалж байгаа нь залууст маань асар том урам зориг өгч байна. Дараагийн гранд финалд заавал ялаарай!
ReplyDelete