Monday, 9 January 2012

Mad Professor - Deep Blue Delay


Here is another Mad Professor pedal, one of the designs which has garnered the most interest around it. Well, it's been gutted and reverse engineered. Unfortunately there is nothing new in the design - it's a pretty standard PT2399 design based off the Rebote Delay 2.5 but it does sound very good.

Here is the schematic and project file (http://www.madbeanpedals.com)




Here is the ProGuitarShop youtube demo of the Deep Blue Delay;


If you fancy a challenge here's a vero layout by Nocentelli, go on - have a pop!


Here is the thread at freestompboxes.org - http://www.freestompboxes.org/viewtopic.php?f=7&t=713

16 comments:

  1. If it is a pretty standard design but does sound very good, any idea what makes that standard design sound so good?

    ReplyDelete
    Replies
    1. It just works - the PT2399 is a decent delay chip, using the op amp buffers and some low pass filtering keeps the circuit simple yet functional; pretty much the basis of all decent sounding circuit designs..

      Delete
    2. Is the low pass filtering you speak of occurring between pins 14 and 15 in the PT2399 feed back circuit? It's a little different than the data sheet example.

      Delete
  2. Layout seems interesting (the transfer plate), but no information is tested. I saw that the four pin diagram shows a grounding pin 3 and the layout does not show it, but that the four pin connects directly to the delay, being open when the volume is turned down. You got to ride it to see if it works?

    ReplyDelete
  3. Would it be difficult to add a tone knob for the delays? Or a switch between the default and a "darker" value? This would be my second build.

    Great site by the way! /J

    ReplyDelete
    Replies
    1. Methinks "Mix 3"? Cap-pot-ground is easy. Switch would be cap-switch-res-ground.

      Delete
  4. how can i resize the pcb so i can print it?

    ReplyDelete
  5. Hi.. I understand that with rpts on max it should oscilate, right? Here's what mine sounds like, with all the pots maxed out - https://dl.dropboxusercontent.com/u/1767893/seaurchindelaytest01.mp3
    it sounds overly dark and just not enough repeats and no oscillation.. thoughts?
    Any idea of which resistors I could change to fix it?
    Thanks!

    ReplyDelete
  6. I bread boarded it, and it didn't oscillate either.

    ReplyDelete
  7. I made this pedal more so it works when I reset the shot and Pt 2399 can someone help me ?

    ReplyDelete
  8. ensure potentiometers at 50k no more and no less

    ReplyDelete
  9. Way cool, some valid points! I appreciate you making this article available, the rest of the site is also high quality. Have a fun. Feel free to visit my website; 바카라사이트

    ReplyDelete
  10. Wow!!! It was really an Informational Article which provide me with much Insightful Information. I would like to first thank the author for such an Insightful Content. keep it up! thankyou Feel free to visit my website; 토토사이트

    ReplyDelete
  11. I would like to thank you for the efforts you have made in writing this article. I am hoping the same best work from you in the future as well. In fact your creative writing abilities has inspired me to start my own Blog Engine blog now. Really the blogging is spreading its wings rapidly. Your write up is a fine example of it. Feel free to visit my website; 바카라사이트

    ReplyDelete
  12. Please connect Pin4 o PT2399 to ground (negative) or else the circuit will not work. Author please correct the circuit schematic.

    ReplyDelete

Comments are welcome on Revolution Deux. However, please do not spam links to unrelated sites - these comments will be removed! Thanks - Briggs.